Opens in a new tab

Who Approves Your Pipe Testing? Water Authorities Across NSW

Aerial view of Sydney

Sydney Water, Hunter Water or a council water authority: who accepts your new water and sewer assets depends on the region. What that means for your pipe testing.

Enquire Today

New water and sewer assets in NSW are not handed over to just one organisation. Depending on where your project is, the pipes you lay will end up owned and operated by Sydney Water, Hunter Water or a council water authority, and each one sets the standards your testing has to meet before it will accept the work.

This article explains who that authority is in each region we work in, what that means for your testing, and how to avoid surprises at handover.

Why the water authority matters

Most authorities build on the national WSA codes, such as the water supply code (WSA 03) and the gravity sewerage code (WSA 02), but many publish their own editions, supplements or technical specifications on top. Those documents decide which tests are required, how they are carried out, what counts as a pass and what the test report must show. For background, see who determines compliance requirements and what standards apply to pipe testing.

Water authorities by region

Greater Sydney: Sydney Water

Across Greater Sydney, new water and wastewater assets are built to Sydney Water’s standards and accepted through Sydney Water’s developer process. Testing results form part of the documentation your Water Servicing Coordinator needs on the way to a Section 73 Compliance Certificate. Sydney Water also requires testing to be done by suitably accredited providers: see can any contractor perform Sydney Water testing.

Wollongong and the Illawarra: Sydney Water

Sydney Water also services the Wollongong, Shellharbour and Kiama areas, so projects in the Illawarra follow the same Sydney Water standards and processes as Greater Sydney.

Newcastle and the Hunter: Hunter Water

Hunter Water is the authority for Newcastle, Lake Macquarie, Maitland, Cessnock and Port Stephens, with its own standards and developer requirements. In the Singleton area, Singleton Council is the water authority. Pressure, vacuum, CCTV and deflection testing are all common requirements for new assets.

Central Coast: Central Coast Council

On the Central Coast, the council is the water and sewer authority. Acceptance testing typically follows WSA 02 requirements for sewers, including compaction, pressure and vacuum testing, maintenance hole vacuum testing, CCTV and deflection testing.

The South Coast: Shoalhaven Water

In the Shoalhaven, Shoalhaven Water (part of Shoalhaven City Council) sets the requirements. Testing is carried out to the WSA codes and Shoalhaven Water’s own requirements, including pressure testing of water and sewer mains, ahead of a Certificate of Compliance.

For a full list of the locations we cover in each region, see our service areas.

What stays the same everywhere

  • The tests themselves. Hydrostatic, air and vacuum, CCTV and deflection testing are used across all five regions. What changes is the detail of how they are specified and reported.
  • Accredited results. Authorities, engineers and certifiers rely on test results from an accredited provider. NATA accreditation gives that independent assurance.
  • Documentation. A clear test report for each section is what gets your assets accepted. See what documentation may be required for Sydney Water compliance.

Avoiding surprises at handover

  • Check which authority your assets will be handed to before construction starts, not at the end.
  • Read that authority’s current requirements; they can change between projects. See are compliance requirements the same for every project.
  • Book testing as sections are completed, so a failure is found while the trench is still open.
  • Keep every test report together, organised by section, for the handover package.

Testing across all five regions

J & J Pipe Testing is NATA accredited, Sydney Water accredited and a WSA certified member, and works from Smeaton Grange across Greater Sydney, Newcastle and the Hunter, the Central Coast, Wollongong and the Illawarra, and the South Coast. Request a quote or contact us to talk through the requirements for your project.

Services in This Article

NATA accredited testing and reporting from J & J Pipe Testing, available across NSW.

Flow & Pressure Testing

Flow and pressure testing of water mains and fire mains for commissioning, with reports for Sydney Water, councils and fire authorities.

Learn More

Hydrostatic Testing

Pressurise pipelines with water to reveal leaks, joint failures or material weaknesses before commissioning, with NATA accredited reports.

Learn More

Vacuum or Air of Pipelines

Checks new sewer pipelines for leaks by sealing the ends, applying air or vacuum and timing any pressure loss against WSA 02.

Learn More

CCTV of Pipelines

High-definition CCTV of new sewer and stormwater pipelines, coded to WSA 05-2020, to find cracks, joint defects or root intrusion without excavation.

Learn More
Get in Touch

Pipe Testing Across NSW

Our NATA accredited crews test pipelines for contractors, councils and developers in five NSW regions. Find your region for local water authority requirements and the locations we cover.

Newcastle & Hunter Region

View Region

Central Coast

View Region

Greater Sydney

View Region

Wollongong & Illawarra

View Region

South Coast

View Region

Related Questions

Recent Posts

More Articles

Hydrostatic pressure test gauge on a new water main

Guides & How-To

What Happens If a Pipe Pressure Test Fails?

A failed water main pressure test means the main stays off the live network. How to find the leak, repair…

17 Nov 2026 · By Bradley Farrell

Read Article

Case Studies

Sewer and Water Acceptance Testing for a Staged Subdivision in Menangle Park

A large subdivision of sewer and water mains in Menangle Park, tested in stages since 2020. Hydrostatic, vacuum, CCTV, compaction…

17 Nov 2026 · By Bradley Farrell

Read Article
CCTV pipe inspection camera

Compliance & Standards

CCTV Inspection of New Sewers: What to Expect Before Handover

A pressure test shows a new sewer does not leak; CCTV shows how it was built. What a handover CCTV…

11 Nov 2026 · By Bradley Farrell

Read Article
Enquire Today

Need accredited pipe testing for your next project? Let's talk.

Send Us a Message

Quick Contact Form