Opens in a new tab

Pipe Testing Services in Campbelltown

Local, Sydney Water Accredited pipe testing, pressure testing, CCTV inspections and compliance reporting for Campbelltown, from our base in Smeaton Grange.

Enquire Today

Pipe Testing in Campbelltown

Campbelltown is a short run south from our base in Smeaton Grange. J & J Pipe Testing provides pipe testing, pressure testing, CCTV inspections and compliance reporting for civil contractors, plumbers, builders and developers across the Campbelltown local government area, from the established suburbs and the Macarthur centre to the southern release areas.

Campbelltown is serviced by Sydney Water. The work splits in two. Infill, commercial and road jobs sit around the existing suburbs, while Menangle Park and Gilead are staged land releases with new water and wastewater mains. Those developer mains have to be tested to Sydney Water standards and accepted before a Section 73 Compliance Certificate is issued. Our Sydney Water and NATA accreditations, and the fact we are already working this corridor, keep that testing on the program.

Pipe Testing Services in Campbelltown

Pressure Testing

Hydrostatic and flow and pressure testing of new water mains, rising mains and services.

Water Main Testing

Testing of water mains for new estates, commercial sites and civil works.

Sewer Testing

Air and vacuum testing of wastewater mains and maintenance holes before handover.

Compliance Testing

Deflection and compaction testing on staged subdivision works.

CCTV Pipe Inspection

CCTV inspection of new and existing pipelines without excavation.

Why Choose J & J Pipe Testing

Accredited Team

We are Sydney Water Accredited, NATA Accredited (#14400) and a WSA Certified Member.

Fast Turnaround

Campbelltown is a short drive from Smeaton Grange, so a program change does not mean a crew coming from outside the region.

Experienced Technicians

Experience on southern release stages and on works in the established suburbs.

Detailed Reporting

Clear, documented results for your coordinator, engineers and Sydney Water.

Working With Campbelltown Contractors & Developers

Campbelltown contractors are usually running two sorts of job at once: renewal and commercial work in the existing area, and long greenfield stages to the south. We work with the site teams from the first sections through to handover. We also service Menangle Park, Camden, Liverpool and the rest of South West Sydney.

Working in Campbelltown? Contact our local team to book testing or discuss your project.

Send Us a Message

Our Services in Campbelltown

Testing, inspection and compliance reporting services available for projects in Campbelltown and surrounding areas.

CCTV of Pipelines

High-definition CCTV of new sewer and stormwater pipelines, coded to WSA 05-2020, to find cracks, joint defects or root intrusion without excavation.

Learn More

Hydrostatic Testing

Pressurise pipelines with water to reveal leaks, joint failures or material weaknesses before commissioning, with NATA accredited reports.

Learn More

Vacuum or Air of Pipelines

Checks new sewer pipelines for leaks by sealing the ends, applying air or vacuum and timing any pressure loss against WSA 02.

Learn More

Vacuum Structures

Detects leaks in maintenance holes and sewer structures by sealing all inlets and applying vacuum to test seal and joint integrity.

Learn More

Deflection Testing

Uses a deflection gauge or ovality prover to detect pipe deformation after backfill, protecting flow capacity and structural integrity.

Learn More

Compaction Testing

Measures backfill density and moisture content to confirm it is compacted correctly to the required specification, typically 98 percent or higher.

Learn More

DCP Testing

Dynamic cone penetrometer testing under maintenance hole foundations for fast, accurate soil strength profiling before bases are poured.

Learn More

Level 1 Supervision

Continuous onsite supervision of backfilling, with compaction tested on every layer and a NATA accredited Level 1 Compaction Report.

Learn More

Flow & Pressure Testing

Flow and pressure testing of water mains and fire mains for commissioning, with reports for Sydney Water, councils and fire authorities.

Learn More

Jetting

Remove roots, grease, and sediment buildup with targeted, high-velocity water streams for long-lasting pipe performance.

Learn More

Blocked Drains

Clear blockages swiftly with high-pressure jetting guided by real-time CCTV inspections, ensuring pipes flow freely without damage.

Learn More
Get in Touch

Accredited Pipe Testing in Campbelltown

J & J Pipe Testing is NATA Accredited (#14400) for certified pressure testing and compliance reporting. This accreditation confirms our technical competence, calibrated equipment, and strict adherence to national testing standards.

Learn more at the official NATA website.

Read More

J & J Pipe Testing is Sydney Water Accredited to perform compliant testing, inspections and verification services on water and wastewater infrastructure.

Learn more at the Sydney Water website.

Read More

J & J Pipe Testing is a WSA Certified Member, recognised for meeting national water industry standards for testing, inspections and compliance reporting.

Learn more at the official WSA website.

Read More
Enquire Today

Need accredited pipe testing for your next project? Let's talk.

Send Us a Message

Quick Contact Form